Diverter Handle (J-400 Series) 6540-439 $12.55
Diverter Handle (J-400 Series) 6540-439 Part # 6540-439, Diverter Knob Fits the following models: 2020+ J-425 & J-495 2019+ J-485 & J-475 10/2017+ J-445 &...
2540-239 DIVERTER: CAP AND KNOB $9.97
DIVERTER: CAP AND KNOB
3/8" x 3/8" x 3/8" T $2.95
3/8" x 3/8" x 3/8" T-Fitting Barbs Part # 6540-097
27mm Hose Clamp $2.50
27mm Hose Clamp 6570-033 These 27mm hose clamps are traditionally used on 3/4" waterlines.
Debris Attachment Clips 6570-391 $2.95 $1.53
Debris Attachment Clips 6570-391 ...
Heater Gasket Set For 2" Heaters $12.50 $7.95
Hot Tub Heater Gasket Set For heater housings with a 2" diameter.
J-200 Collection Air Control $16.96
Jacuzzi J-200 Collection Air Control Air Control 2540-281 includes air control and knob Fits the following models: 2012+ J-275, J-245, J-235, J-210 2007+ J-270, J-280 2008+ J-230 2017+ J-225, J-215 2017+ J-145,...
Suction Fitting Grate $12.50 $9.99
Suction Grate Cover 6540-564 For Select Jacuzzi Hot Tubs® & Sundance Spas® VGB compliant suction grate for the following Jacuzzi® & Sundance® hot tub models: All Jacuzzi LX Collection Hot Tubs All...
Ozone Check Valve $13.88
Ozone Check Valve
Pump Split Nut 2" $8.95
Hot Tub Pump Split Nut 400-5171 For 2" Plumbing Unions
Heater Union Split Nut $19.95 $12.85
Heater Union Split Nut By Balboa 50086 For spas with 2" plumbing unions Used on various high flow heaters similar to the picture below:...
J-200 Collection Diverter Gate $19.80
Jacuzzi J-200 Collection Diverter Gate 6541-242 If your main diverter valve is hard to turn, this is a good thing to swap out. Fits the following models: J-280 J-275 J-220 Does not fit J-300 or J-400 Collection models...
Ozone Injector $57.35 $26.77
Ozone Injector Works for any model with 3/4" plumbing for filtration. Always a good idea to replace this when replacing ozone generators or check valves...
2001 and Older Light Assembly $26.50 $19.90
Jacuzzi light housing for models manufactured prior to 2002 Measures approximately 3 1/4" across the face. Includes: New housing New O-Ring New Retaining Nut New Bulb Retainer ...
3/4" Barb x 3/4" Spigot $4.95
Jacuzzi 6540-262 3/4" barb x 3/4" spigot Used in various applications and models. For example: Underneath most drain and heater return valves And more...
Diverter Valve Cap $9.95 $7.95
Jacuzzi Diverter Valve Cap 6540-729 Fits all 2002+ J-300, J-LX, & J-400 Collection Spas
Mini Power Pro DX Rotational $12.95
Jacuzzi Mini Power Pro DX Rotational Mini Power Pro DX. This is the rotational jet for spas manufactured between January 2002 until July 2003 only. This is a non-adjustable jet. Use in place of part #...
Micro Power Pro SX Jet Assembly $20.47 $11.50
Jacuzzi Micro Power Pro SX Jet Assembly Fits various J-300 and J-400 Collection models. Traditionally used for the hands or legs. Includes the following: #2 Jet Face #4 Retainer #5 Nozzle #6 Fitting #7 O-Ring...
PowerPro Fx Jet $17.29 $9.50
Jacuzzi PowerPro FX Jet 6540-555 Jet Face: Mini PowerPro FX Without Stainless Steel Escutcheon Used On J-300 Collection Spas 2/2004 and...
Stainless Steel Pump Bleed Line Barb Fitting $17.25 $14.95
Jacuzzi Pump Barb Fitting 6540-171 AKA 6540-030 ALL NEW! Stainless Steel Pump Bleed Line Barb FittingStainless Steel Pump Bleed Line Barb Fitting. Never replace that old plastic fitting again! Replaces part number 6540-030 ...
Loading... Please wait... 
