Plumbing

Replacement Pump Split Nut 2"

Split Nut 2" Jacuzzi/Sundance Straight Through Heaters

Split Nut - Jacuzzi/Sundance Straight Through Heaters

Pump Union O-Ring - Grey Nut

Pump Union O-Ring - Grey Nut Fits older unions with grey nut.  Union design changed after May 2019. The newer style o-ring for the white union nut is 6000-554.

Gasket for “T” 3-Way 1-1/2” Waterfall Valve

"T" Gasket for 3-Way Waterfall Valve  This is the gasket that fits with waterfall valve 6000-298. Clear 1.5" gasket  

O-Ring for 3-Way Waterfall Valve

O-Ring for 3-Way Waterfall Valve This O-Ring goes with the 3-way waterfall valve 6000-298.

Nut : Accu-Pressure

Nut for accu-pressure jet 6540-699

O-ring 1.228 ID x 1.648 OD

Replaced 6540-682

Gravity Drain with Cover

Gravity Drain with Cover  Includes o-rings (x2) and nut Fits the following Jacuzzi models: 2015-2019 J-LX All J-500 2016-2024 1-Pump J-300 2/5/20-2024 2-pump J-300 2017-2023 J-200 All J-100 Fits...

Heater Return (Grommet Style)

Heater Return (Grommet Style) Grommet included This part is NOT threaded and does NOT have a nut on the back. Instead it uses a rubber grommet that the heater return pushes into. This is the new...

Quick Drain Valve

Quick Drain Valve Fits the following models: 2012+ 880 Series 10/2016+ 980 Series 2015+ J-500 2016+ J-400 Valve only. Other components not include

Diverter Stem O-Ring

O-ring for diverter stem Grey - 0.8125in OD, 0.591 ID Fits with the following diverter valves: 6540-568 6000-104  

Diverter Handle Sundance 880 Series 2024+

Waterfall J-400 Series 2006-2015

Waterfall fits the following models: 2005-2015 Sundance AquaTerrace 880 Series 2006-2015 Jacuzzi J-400 Series 

3/4" x 3/4" Barb Fitting 90°

3/4" x 3/4" Barb Fitting 90° Part # 6540-118

3/4" x 3/4" Barb Fitting

3/4" x 3/4" Barb Fitting Part # 6541-075

3/8" Barb Clamp

Barb Clamp for 3/8" Lines Part # 6570-491 Use with part # 6540-441

3/8" x 3/8" Barb Fitting

3/8" Barb Fitting P/N 6540-441  

Diverter Nut 6540-455 Jacuzzi® J400 and J300

Diverter Cap/Nut SKU 6540-455 In mid-2023 the clear version of this part was discontinued and it is now solid grey. These parts are interchangeable with no modifications necessary. O-ring for nut:...

Sundance® Filter Weir Assembly

Sundance Filter Weir Assembly Part # 6540-882 Fits the follwoing models: 2015+ 980 Series2006+ 880/800/780 Models2011-2018 Select Models

Jacuzzi® Diverter T-Valve

Jacuzzi Diverter Valve 6540-568 J-300, LX, and J-400 Collection diverter gate. If you keep breaking diverter valve handles then it is a good idea to replace this. Also, very helpful to coat...

Elbow: Waterfall Light Retainer

90° Elbow 3/4" Barb x Spigot 6540-000 90° Elbow 3/4" Barb x Spigot (Glues into Each Waterfall Port And Holds LED Pin Lights) Fits the following products: 2011-2020 Jacuzzi LX Collection 2013+...

Diverter O-Ring

Diverter O-Ring 6540-550 Standard on all 2017+ Jacuzzi Hot Tub and Sundance Spa diverters.  When replacing the original 6540-966 diverter gate, use new style 6540-968 gate below. For use with the...

3/8" x 3/8" x 3/8" T

3/8" x 3/8" x 3/8" T-Fitting Barbs Part # 6540-097

27mm Hose Clamp

27mm Hose Clamp 6570-033 These 27mm hose clamps are traditionally used on 3/4" waterlines.