Jacuzzi/Sundance Pump 240v, 2.5 HP, 1 Speed 48 Frame, 6500-341

This was generally used as pump #2 on most models

The pump wet end can be rotated to the appropriate angle for your application. 

Replaces pump #2 on the following models:

• 2002-July 2010 J-335
• 2002-July 2010 J-340 & J-345
• 2002-July 2010 J-350 & J-355
• 2002-July 2010 J-360 & J-365
• 2002-July 2010 J-370 & J-375
• 2002-2006 J-380 & J-385
• 2005-2006 J-230
• 2007-July 2010 J-270 & J-280
• Altamar-1998-2005
• Bahia 2000-2006
• Calypso 1996-1999
• Calypso II 1997-1998
• Cameo, Optima, & Maxxus (#2 & #3) 1997-2004
• Certa 2007** (Please see notes below)
• Chelsee, Hamilton, Hartford, Hawthorne 2007-04/2010
• Marin 2000-2005
• Madison 1997-1999
• Montego 1997-1998
• Palermo 2000-2006

Please Note: Universal mounting bracket part# 6000-532 will be required if you are replacing a motor with a fixed mounting bracket welded to the motor housing.  If your motor body has the mounting bracket welded to it, then you need the new style bracket (no modifications necessary).  If your motor body has a single strap wrapped around it and a single bolt hold that strap in place then you will not need the new style bracket as your spa is already equipped with it.  

Replaces all of the following part numbers: 6500-767, 6500-126, 6500-131, 6500-263, 6500-266, 6500-269, 6500-763, 6500--766, 6500-769, 06020194-2

**Pump 2 for Certa Model was replaced early in 2007 from 6500-341S to 6500-351; Approximately 11/2012 changed
6500-351 to 6500-369. Verify pump if the spa was manufactured in early 2012 for either a 48F or 56F. Late-Year (08/2010) change: 680/780 Series Pump/Motor changed from 48FR (6500-343S) to 56FR (6500-367S). Verify
pump/motor and bracket needed